股票止跌信号预警公式

❶ 通达信预警公式

停牌:=DYNAINFO(17)>0;
创业板:=IF(CODELIKE('300'),0,1);
六十:=80,LINETHICK2;
七七:=77,LINETHICK2;
RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100;
K:=SMA(RSV,3,1); D:=SMA(K,3,1); J:=3*K-2*D;
KDJ金叉:=CROSS(K,D) AND D<六十 AND K<六十 AND J<七七
AND CAPITAL/1000000<=4.23 AND C>=6.20 AND C<18.36 AND 创业板 AND 停牌;
DIFF:=EMA(C,12)-EMA(C,26);
DEA:=EMA(DIFF,9);
T:=BARSLAST(DEA<0);
DD1:=COUNT(CROSS(DIFF,DEA),T)>=1 AND CROSS(DIFF,DEA) ;
DD2:=V>REF(MA(V,5),1)*1.5;
DD3:=(C/REF(C,1)-1)*100;
轴上第一金叉:=CROSS(DIFF,DEA) AND DEA>-1.0 AND
DEA<0.5 AND CLOSE>REF(CLOSE,1);
空中加油:DD1 AND DD2 AND DD3>3 OR 轴上第一金叉 AND KDJ金叉;

❷ 股票公式修改成预警 公式

MA5:=EMA(C,5);
MA13:=EMA(C,13);
UP:=DRAWLINE(L=LLV(L,BARSLAST(CROSS(MA13,MA5))+1),LLV(L,BARSLAST(CROSS
(MA13,MA5))+1),H=HHV(H,BARSLAST(CROSS(MA5,MA13))+1),HHV(H,BARSLAST(CROSS
(MA5,MA13))+1),0);
DOWN:=DRAWLINE(H=HHV(H,BARSLAST(CROSS(MA5,MA13))+1),HHV(H,BARSLAST(CROSS(MA5,MA13))+1),L=LLV(L,BARSLAST(CROSS(MA13,MA5))+1),LLV(L,BARSLAST(CROSS
(MA13,MA5))+1),0);
HR:=HHV(HIGH,55);
HRY:=LLV(LOW,55);
HRY11:=HR*HRY;
HRY33:=SQRT(HRY11);
预警:REF(DOWN,1)<REF(DOWN,2) AND UP>REF(DOWN,1) AND C<HRY33;

❸ 怎么设置通达信预警公式（

1. 打开通达信股票软件。

2. 点检“功能”菜单，然后在菜单下拉列表里选“预警系统”，在预警系统里选“条件预警设置”。如下图。

4. 然后再预警品种设置对话框内选择需要预警的股票池

5. 最后在“功能”菜单里选预警系统,"条件预警开关"即可。

❹ 麻烦把股票公式改成预警公式

M1:=5;M2:=10;M3:=30;M4:=60;
MA1:=MA(CLOSE,M1);
MA2:=MA(CLOSE,M2);
MA3:=MA(CLOSE,M3);
MA4:=MA(CLOSE,M4);
VAR3:=LLV(HIGH,240);
VAR4:=100*(CLOSE-VAR3)/VAR3;
VAR5:=(CLOSE-LLV(LOW,528))/(HHV(HIGH,528)-LLV(LOW,528))*100;
VAR6:=(CLOSE-LLV(CLOSE,530))/(HHV(CLOSE,530)-LLV(CLOSE,530))*100;
VAR7:=0;
VAR8:=SMA(MAX(CLOSE-REF(CLOSE,1),0),34,1)/SMA(ABS(CLOSE-REF(CLOSE,1)),7,1)*100;
VAR9:=SMA(MAX(CLOSE-REF(CLOSE,1),0),13,1)/SMA(ABS(CLOSE-REF(CLOSE,1)),13,1)*100;
VAR10:=IF(TROUGHBARS(3,16,1)=0 AND HIGH>LOW+0.04,4,0);
VAR11:=ZIG(3,6)>REF(ZIG(3,6),1) AND REF(ZIG(3,6),1)<=REF(ZIG(3,6),2) AND REF(ZIG(3,6),2)<=REF(ZIG(3,6),3);
VAR12:=ZIG(3,6)<REF(ZIG(3,6),1) AND REF(ZIG(3,6),1)>=REF(ZIG(3,6),2) AND REF(ZIG(3,6),2)>=REF(ZIG(3,6),3);
VAR13:=ZIG(3,22)>REF(ZIG(3,22),1) AND REF(ZIG(3,22),1)<=REF(ZIG(3,22),2) AND REF(ZIG(3,22),2)<=REF(ZIG(3,22),3);
VAR14:=ZIG(3,22)<REF(ZIG(3,22),1) AND REF(ZIG(3,22),1)>=REF(ZIG(3,22),2) AND REF(ZIG(3,22),2)>=REF(ZIG(3,22),3);
VAR15:=ZIG(3,51)>REF(ZIG(3,51),1) AND REF(ZIG(3,51),1)<=REF(ZIG(3,51),2) AND REF(ZIG(3,51),2)<=REF(ZIG(3,51),3);
VAR16:=ZIG(3,51)<REF(ZIG(3,51),1) AND REF(ZIG(3,51),1)>=REF(ZIG(3,51),2) AND REF(ZIG(3,51),2)>=REF(ZIG(3,51),3);
VAR17:=ZIG(3,72)>REF(ZIG(3,72),1) AND REF(ZIG(3,72),1)<=REF(ZIG(3,72),2) AND REF(ZIG(3,72),2)<=REF(ZIG(3,72),3);
VAR18:=ZIG(3,72)<REF(ZIG(3,72),1) AND REF(ZIG(3,72),1)>=REF(ZIG(3,72),2) AND REF(ZIG(3,72),2)>=REF(ZIG(3,72),3);
VAR19:=EMA(CLOSE,2)-EMA(CLOSE,150);
买1:=VAR10;
买2:=(VAR11+VAR13+VAR15+VAR17);
卖1:=(VAR12+VAR14+VAR16+VAR18);
B:买1>0 OR 买2>0;

❺ 请高手把通信达指标出现“股票底部”做个预警公式和条件选股，谢谢

TYP:=(HIGH+LOW+CLOSE)/3;
CCI:=(TYP-MA(TYP,14))/(0.015*AVEDEV(TYP,14));
A:=REF(C,1);
RSI:=SMA(MAX(C-A,0),6,1)/SMA(ABS(C-A),6,1)*100;
A1:=(C/MA(C,5)-1)*100<-10;
A2:=(C/MA(C,13)-1)*100<-10;
A3:=(C/MA(C,34)-1)*100<-15;
A4:=RSI<18;
A5:=CCI<-120;
A6:=COUNT(ABS(C/REF(C,1)-1)*100>=6,30)>=1;
股票底部:=A1 AND A2 AND A3 AND A4 AND A5 AND A6;
XG:(A1+A2+A3) AND (A4+A5+A6);
本来就是选股公式，优化一下。{个人看法仅供参考}

❻ 求止跌信号+阳包阴的选股公式

下影:=(MIN(C,O)-L)/L*100>2 OR O=L;
A:=C>MAX(REF(C,1),REF(O,1));
M5:=MA(C,5);
X:A AND REF(下影,1)=1 AND REF(M5,1)<REF(M5,2) AND V>REF(V,1) AND C<MA(C,20);

❼ 股票预警公式 以下2个公式帮忙各一起

虚拟成交量:=IF(DYNAINFO(7)=CLOSE AND DYNAINFO(10)=AMOUNT,MAX(VOL,DYNAINFO(17)*REF(MA(VOL,5),1)),0);
实际成交量:=VOL;
选股公式:=虚拟成交量/实际成交量>=2;
选股公式 OR (MA(C,5)>REF(MA(C,5),1) AND MA(C,10)>REF(MA(C,10),1) AND MA(C,20)>REF(MA(C,20),1) AND MA(C,60)>REF(MA(C,60),1) AND MA(C,120)>REF(MA(C,120),1) AND NOT(REF(MA(C,5)>REF(MA(C,5),1) AND MA(C,10)>REF(MA(C,10),1) AND MA(C,20)>REF(MA(C,20),1) AND MA(C,60)>REF(MA(C,60),1) AND MA(C,120)>REF(MA(C,120),1),1)));

{已测试，复制可直接引用，如果回答满意，请记得给采纳}

❽ 求股票预警公式

可以编写连续5分钟成交量都在1千万以上的预警公式，但不是所有软件都支持的。这需要你说明清楚用什么软件。

❾ 股票预警公式如何报警

触及预警公式就会自动引发预警。
公式预警有很多种，要根据自己偏好事先设置好。
比如：信量比预警公式、涨停预警公式、大单预警、关键点位突破预警 。。。等等。

❿ 求通达信股票软件预警公式

振幅:=1.005;
aa:=ref(c,2)/ref(o,2);
bb:=ref(c,1)/ref(o,1);
cc:=ref(v,3)*0.6;
缩量:=ref(v,2)<=cc and ref(v,1)<=cc;
小阳小阴:=BETWEEN(aa,1/振幅,振幅) and BETWEEN(bb,1/振幅,振幅);
跌破7日线:=l<ma(c,7) and c>o and ref(v,1)<=v*0.6;
预警:缩量 and 小阳小阴 and 跌破7日线;

我振幅默认设定是小于0.5%，这个可以自行调节需要大小。另外。看图我默认为今日为阳线而且放量，如果不需要可将"c>o and ref(v,1)<=v*0.6"去掉。